Zigview S2 Review - Motion detection, Timer and Bulb
The more advanced features like motion detection, interval timer and of course the bulb mode are quite easy to use. By using the enter key and the up and down arrow keys you can select and setup the various options. To go forward in the menu structure, you simply press and hold the enter key. The arrow keys are used to select and change settings. To go back you press and hold the back key.
Starting and pausing the Zigview S2 is done by pressing the enter key once to start and once more to pause (pause is only used for the interval mode). To stop the current operation you simply press and hold the back key...
- Introduction
- Design and Usage
> Motion detection, Timer and Bulb
- Samples, Conclusion and Comments
Motion detection
... not yet tested!
Time Lapse
Recently I've tried my hand at Time Lapse photography, to set up a Time Lapse sequence you can simply set the Zigview S2 to record the amount of frames you want. It will then automatically show you the duration, depending on the interval timer. Here you can see a Time Lapse of a building being demolished
Music is by echoed / CC BY-NC 3.0
Related EXU article
Bulb
... not yet tested!
Starting and pausing the Zigview S2 is done by pressing the enter key once to start and once more to pause (pause is only used for the interval mode). To stop the current operation you simply press and hold the back key...
- Design and Usage
> Motion detection, Timer and Bulb
- Samples, Conclusion and Comments
... not yet tested!
Time Lapse
Recently I've tried my hand at Time Lapse photography, to set up a Time Lapse sequence you can simply set the Zigview S2 to record the amount of frames you want. It will then automatically show you the duration, depending on the interval timer. Here you can see a Time Lapse of a building being demolished
Music is by echoed / CC BY-NC 3.0
Related EXU article
... not yet tested!